Smooth Cast 66D

Unit Size	Net Weight
Pint Kit	1.9 lb
Gallon Kit	15.4 lb
Five Gallon Kit	77 lb

Smooth Cast 66D can be cast rotationally or solid for a variety of industrial and art-related applications. Fully cured castings are semi-rigid and exhibit good impact resistance. Castings resist moisture and mild solvents and can be machined, sanded and painted. Color effects are possible by adding SO-Strong tm color tints. New mercury free formulation. PropertiesTechnical Properties

Mix Ratio by Weight	100A:93B
Mix Ratio by Volume	1A:1B
Pot Life	7 minutes
Cure Time	60 minutes
Color	Grey
Shore Hardness	66D
Mixed Viscosity	120 cps
Shrinkage	0.01 in./in.
Specific Volume	26.4 cu. in./lb.
Specific Gravity	1.05g/cc
Tensile Strength	2,400 psi
Elongation @ Break	20%

How do I remove release agent from my cured urethane casting if I want to prime or paint the casting? Removing a silicone-based release agent from your cured urethane casting is not easy. The most effective way is to sand blast or bead blast the surface of your casting. However, sand blasting removes a micro thin layer of the castingÕs surface. If not done properly, you can damage or remove fine detail. Soap Wipe or brush the casting with a soap that has high alkali content. Cascade brand dishwashing gel is highly alkaline and also contains baking soda, which is an advantage. Solvents Wipe or brush the casting with Acetone, Toluene, Isopropyl Alcohol or Mineral Spirits.
Important: follow all safety precautions when using flammable liquids. You can then prime and paint your casting.Media

• Video

Documentation

Technical Bulletin

Special Order Items PRODUCT ADVISORY:
The products listed below are currently SPECIAL ORDER items and require pre order.
Lead times may vary - For more information please contact our staff.

796315 - Smooth Cast 66D - Five Gallon Kit
Related ProductsRELATED PRODUCTS:

Ease Release 200