Rebound 40 Brush-On

Unit Size	Net Weight
Pint Kit	2 lb
Gallon Kit	18 lb
Five Gallon Kit	90 lb

Rebound¨ 25 and Rebound¨ 40 are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound¨ rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. Rebound¨ 25 is soft, flexible and is good for making molds of models with deep undercuts. Depending on model configuration, Rebound¨ 25 can be inverted as a glove molds. Rebound¨ 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound¨ 25 and back it up with two coats of Rebound¨ 40.

Note: This product will not work with modeling clays containing sulfur. PropertiesTechnical Properties

Mix Ratio by Weight	1A:1B
Mix Ratio by Volume	1A:1B
Pot Life	20 minutes
Cure Time	6 hours
Color	Green
Shore Hardness	40A
Mixed Viscosity	Brushable
Shrinkage	< .001 in./in.
Specific Volume	23.5 cu. in./lb.
Specific Gravity	1.14g/cc
Tensile Strength	486 psi
Elongation @ Break	324%
Die B Tear Strength	106 pli

Media

• Video
• Video
• Video

Documentation

Technical Bulletin

Related ProductsRELATED PRODUCTS:

Silc Pig Silicone Pigments

Ignite Fluorescent Colorants

Ease Release 200

Ease Release 205

Plasti-Paste II

Plasti-Paste Epoxy

Shell Shock FAST Resin

Shell Shock SLOW Resin

Plaster Bandages

Thivex Silicone Thickener