Mold Star 14T

Unit Size	Net Weight
Pint Kit	2 lb
Gallon Kit	16 lb
Five Gallon Kit	80 lb

Mold Star 14T is an easy to use Shore 14A translucent platinum silicone that features a relatively low viscosity, and vacuum degassing is not required for most applications.
Mold Star 14T cures in to a soft, strong rubber that is tear resistant and exhibits very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials.
Mold Star 14T silicone can be thickened with THI-VEX thickener for brush-on application and effects. An infinite number of color effects can be achieved by adding Silc Pig silicone pigments or Cast Magic effects powders. Mold Star 14T is heat resistant up to 450F (232C) and is suitable for casting low-temperature melt metal alloys. Material is skin safe and certified by an independent laboratory.

Note: This product will not cure against surfaces containing sulfur, even when sealed. PropertiesTechnical Properties

Mix Ratio by Weight	1A:1B
Mix Ratio by Volume	1A:1B
Pot Life	3 minutes
Cure Time	9 minutes
Color	Translucent
Shore Hardness	14 A
Mixed Viscosity	11,000 cps
Shrinkage	< 0.001 in./in.
Specific Volume	25.6 cu.in./lb.
Useful Temperature (max)<	450 F
Useful Temperature (min)<	-65 F
Tensile Strength	420 psi
100% Modulus	47 psi
Elongation @ Break	740 %
Die B Tear Strength	90 pli

Documentation

Technical Bulletin

Special Order Items PRODUCT ADVISORY:
The products listed below are currently SPECIAL ORDER items and require pre order.
Lead times may vary - For more information please contact our staff.

802960 - Mold Star 14T - Five Gallon Kit