Anbieter: Smooth-On Inc
Mold Max 15T
Beschreibung
| Unit Size | Net Weight |
| Quart Kit | 2 lb |
| Gallon Kit | 9.9 lb |
| Five Gallon Kit | 49.5 lb |
| Mix Ratio by Weight | 100A:10B |
| Pot Life | 45 minutes |
| Cure Time | 24 hours |
| Color | Translucent |
| Shore Hardness | 15A |
| Mixed Viscosity | 20,000 cps |
| Shrinkage | 0.002 in./in. |
| Specific Volume | 25.6 cu. in./lb. |
| Specific Gravity | 1.08g.cc |
| Useful Temperature (max)< | 400¼F |
| Useful Temperature (min)< | -65¼F |
| Tensile Strength | 490 psi |
| 100% Modulus | 35 psi |
| Elongation @ Break | 600% |
| Die B Tear Strength | 94 pli |
Mold Max¨ 15T Silicone can be thickened with THI-VEX¨ II additive for brush-on applications. It can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).
Although not usually necessary, a release agent will make demolding easier when casting into or over most surfaces. Ease Release¨ 200 is a proven release agent for making molds with silicone rubber and for releasing new silicone from cured silicone.Media
- Video
Technical Bulletin
Special Order Items PRODUCT ADVISORY:The products listed below are currently SPECIAL ORDER items and require pre order.
Lead times may vary - For more information please contact our staff.
799439 - Mold Max 15T - Five Gallon Kit
Related ProductsRELATED PRODUCTS:
Silc Pig Silicone Pigments
Ignite Fluorescent Colorants
Ease Release 200
Ease Release 205



